Here is an small overview on How to Share Internet Connection Over LAN.
You have to put two LAN Cards/Ethernet Cards in your Server Computer which will share the Internet Connection in other Computers.
Your ISP (Internet Service Provider) will provide you an IP Address for Internet Connection, which you must configure to your LAN Card where Internet Cable is connected. Assuming this LAN Card as LAN1 in the diagram below.
And the another LAN Card of Server Computer should configure withe the IP Address as LAN2 which is described below.
And in the another Computer's (which are connected with the Server through HUB or Switch or directly connected with the Server) LAN Card should be configured as LAN3 which is also described below.
N.B: Make sure that all the Firewalls of Windows or AntiVirus Programs are properly configured or disabled.
The IP addresses of the different LAN Cards are as follows
LAN 1 Shared (This IP will be provided by ISP)
IP address : 10.10.165.20
Subnet mask : 255.255.255.192
Default gateway : 10.10.165.1
Preferred DNS server : 172.16.0.20
Alternate DNS server : 202.54.1.63
LAN 2
IP address : 192.168.0.1
Subnet mask : 255.255.255.0
Default gateway :
Preferred DNS server :
Alternate DNS server :
LAN 3
IP address : Obtain an IP address automatically
Subnet mask :
Default gateway :
Preferred DNS server :
Alternate DNS server :
If the ISP is BSNL then the IP Address of LAN1 are follows:
IP address : 192.168.1.10 or 192.168.1.11
Subnet mask : 255.255.255.0
Default gateway : 192.168.1.1
Preferred DNS server : 202.218.222.222 or 208.67.222.222 or 208.67.220.220
Alternate DNS server : 202.218.220.220 or 208.67.220.222 or 208.67.222.220
No comments:
Post a Comment